Changes for page Visiting the fields

Last modified by Андрей Калиновский on 2023/04/25 11:29

<
From version < 8.1
edited by Андрей Калиновский
on 2023/04/25 11:29
To version < 7.1 >
edited by Андрей Калиновский
on 2023/04/25 11:29
Change comment: Загрузить новое вложение image-20230425112906-1.png

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Visiting the fields
1 +Посещение полей
Content
... ... @@ -1,27 +1,28 @@
1 -The "Field visits" report displays information about the trips of equipment across the field in the specified time period. The report allows, without taking into account the fact, to perform a preliminary analysis of work in the field.
1 +Отчет "Посещение полей" отображает информацию о поездках техники по полю в указанный временной промежуток. Отчет позволяет, не выполняя учета факта, выполнять предварительный анализ работ на поле.
2 2  
3 -For the report to work, the object model must have the option **Contains built-in aggregate** . The report operation is also affected by the settings of **the Geo objects filtering** group . The object must spend within the field boundaries the period of time specified in the **By time of location, sec** setting , and if the **By run of half of the geoobject perimeter** option is enabled , then the run along the field is also taken into account, it must be greater than or equal to half of the field perimeter **.**
3 +Для работы отчета необходимо, чтобы у модели объекта была указана опция **Содержит встроенный агрегат**. Также на работу отчета влияют настройки группы **Фильтрация геообъектов**. Объект должен провести внутри границ поля тот период времени, что указан в настройке **По времени нахождения, сек** и если включена опция **По пробегу половины периметра геообъекта**, то также учитывается величина пробега по полю, она должна быть больше или равна половине периметра поля**.**
4 4  
5 -[[image:image-20230425112906-1.png]]
6 6  
7 -When building a report in the **Fields** panel , you can display trip tracks in the field when you select rows in the table.
6 +[[image:Снимок экрана (400).png||height="296" width="800"]]
8 8  
9 -The table displays the following information:
8 +При постройке отчета в панели **Поля** можно отображать треки поездок по полю при выделении строк в таблице.
10 10  
11 -* Button "Build history" - displayed when building a report through the monitoring system. Allows you to build a report directly from the table on the object specified in the "Object" column in this line. By default, the time and date the field was processed is specified.
12 -* Object - the name of the object that visited the field.
13 -* Field - the name of the visited field.
14 -* Year - the crop year that is specified for the field at the time it was visited.
15 -* Culture - the culture specified in the annual planning at the time of the visit to the field.
16 -* Area, ha - field area.
17 -* Start - the start time of the trip across the field.
18 -* End - the end time of the field trip.
19 -* Duration is the time spent driving around the field.
20 -* Engine hours - the total time of the object's engine operation during trips across the field.
21 -* Mileage, km - total mileage on a trip across the field.
22 -* Passed, ha - cultivated area of ​​the field during the trip. The data on the width of the unit are taken from the model of the object of the specified equipment.
23 -* Average speed, km/h - the average speed of the object in a trip across the field.
24 -* Max. speed, km/h - maximum speed in a trip across the field.
25 -* Fuel at start - fuel level at the beginning of the field trip.
26 -* Fuel at End - The fuel level at the end of a field trip.
27 -* Consumption, l / ha - the value of fuel consumption for the entire trip divided by the value of "Passed, ha".
10 +В таблице отображается следующая информация:
11 +
12 +* Кнопка «Построить историю» - отображается при построение отчета через систему мониторинга. Позволяет построить отчет прямо из таблице по объекту указанному в столбце «Объект» в данной строке. По умолчанию указывается время и дата обработки поля.
13 +* Объект - имя объекта, посещавшего поле.
14 +* Поле - наименование посещаемого поля.
15 +* Год - год урожая, который указан для поля в момент его посещения.
16 +* Культура - культура, указанная в годовом планировании в момент посещения поля.
17 +* Площадь, га - площадь поля.
18 +* Начало - время начала поездки по полю.
19 +* Конец - время окончания поездки по полю.
20 +* Продолжительность - время проведенное в поездке по полю.
21 +* Моточасы - суммарные время работы двигателя объекта в поездки по полю.
22 +* Пробег, км - суммарный пробег в поездке по полю.
23 +* Пройдено, га - обработанная площадь поля во время поездки. Данные о ширине агрегата взяты модели объекта указанной техники.
24 +* Средняя скорость, км/ч - средняя скорость объекта в поездке по полю.
25 +* Макс. скорость, км/ч - максимальная скорость в поездке по полю.
26 +* Топливо в начале - уровень топлива в начале поездки по полю.
27 +* Топливо в конце - уровень топлива в конце поездки по полю.
28 +* Расход, л/га - значение расхода топлива за всю поездку деленное на значение «Пройдено, га».

Menu

GLONASSSoft wiki - 2023 г