Wiki source code of Connecting equipment
Last modified by Андрей Калиновский on 2023/04/25 17:12
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
9.1 | 1 | To carry out monitoring, subscriber (GPS/GLONASS) terminals are installed at the facilities, both manufactured by GLONASSSoft on UMKa3xx platforms, and by other manufacturers. |
| |
1.1 | 2 | |
| 3 | ---- | ||
| 4 | |||
| |
9.1 | 5 | ==== Setting up GPS/GLONASS terminals ==== |
| |
1.1 | 6 | |
| |
9.1 | 7 | Data from subscriber terminals are transmitted directly to the GLONASSSoft server. The amount of data transferred and the frequency of data transfer depend on the settings of a particular device and can often be changed depending on the needs. |
| |
1.1 | 8 | |
| |
9.1 | 9 | Terminals are configured using special configurator programs from a computer. Some terminal models, such as UMKa3xx from GLONASSSoft, support configuration via Bluetooth from laptops, tablets and smartphones, as well as remote configuration via the Internet. |
| |
1.1 | 10 | |
| |
9.1 | 11 | More information about setting up the equipment can be found [[in the instruction manual>>url:https://glonasssoft.ru/ru/equipment]] provided by the manufacturer. |
| |
1.1 | 12 | |
| |
9.1 | 13 | **A mandatory requirement for configuring the device is to specify the server IP address** and **port number** through the configurator , which is individual for each device model. |
| |
1.1 | 14 | |
| |
10.1 | 15 | You can specify the port number in the [[Terminal Support section>>https://enwiki.glonasssoft.ru/bin/view/%D0%9F%D0%BE%D0%B4%D0%B4%D0%B5%D1%80%D0%B6%D0%BA%D0%B0%20%D1%82%D0%B5%D1%80%D0%BC%D0%B8%D0%BD%D0%B0%D0%BB%D0%BE%D0%B2/]] |
| |
1.1 | 16 | |
| 17 | ---- | ||
| 18 | |||
| |
9.1 | 19 | ==== Settings in GLONASSSoft ==== |
| |
1.1 | 20 | |
| |
9.1 | 21 | When connecting the configured equipment to the GLONASSSoft monitoring system, it is necessary to create a new object in the object tree. |
| |
1.1 | 22 | |
| |
9.1 | 23 | [[image:image-20230424163130-1.png]] |
| |
1.1 | 24 | |
| |
9.1 | 25 | For a new object, you must specify: |
| |
1.1 | 26 | |
| 27 | * ((( | ||
| |
9.1 | 28 | Name of the object (arbitrarily, usually the state number of the car) |
| |
1.1 | 29 | ))) |
| 30 | * ((( | ||
| |
9.1 | 31 | Object model (select from the directory) |
| |
1.1 | 32 | ))) |
| 33 | * ((( | ||
| |
9.1 | 34 | Device IMEI (unique number). |
| |
1.1 | 35 | ))) |
| 36 | * ((( | ||
| |
9.1 | 37 | Device type |
| |
1.1 | 38 | ))) |
| 39 | |||
| |
9.1 | 40 | Additionally, you can specify: |
| |
1.1 | 41 | |
| 42 | * ((( | ||
| |
9.1 | 43 | Object subdivision |
| |
1.1 | 44 | ))) |
| 45 | * ((( | ||
| |
9.1 | 46 | Numbers of SIM cards installed in the device. |
| |
1.1 | 47 | ))) |